| Monday Morning August 15 | | | |
| | | | | |
| 7:00 AM | Continental Breakfast Buffet | | |
| | Rear of Columbus Room | | | |
| | Plenary Session | | | |
| | Columbus Room | | | |
| 7:50 AM | Welcome and Morning Announcements | | |
| | F. Pourboghrat | | | |
| 8:00 AM | Opening Address | | | |
| | Mr. James Wiemels, GM Vice President and General Manager for GM Manufacturing Engineering |
| 8:30 AM | Overview of Sheet Metal Forming Modeling Technology | |
| | M. L. Wenner, General Motors Corporation, U.S.A. | | |
| 9:30 AM | Morning Coffee Break | | | |
| | Rear of Columbus Room | | | |
| | Business Impact of Stamping CAE and Simulation Technology Session I | Springback Compensation Session I | Metal Packaging Session | |
| | C. T. Wang | K. Roll & S. Xu | R. E. Dick & G. A. Duffet | |
| | | | | |
| | Columbus | Marquette | Richard | |
| 9:45 AM | Impact of Simulation Technology on Die & Stamping Business | Die Face Engineering based Springback Compensation Strategy and Implementation | Optimum Design of Aluminum Beverage Can Ends Using Structural Optimization Techniques | |
| | M. W. Stevens | A. Tang, W. Lee, J. He, J. B. Xu, K. S. Liu, and C. C. Chen | K. Yamazaki, R. Itoh, J. Han, M. Watanabe, and S. Nishiyama | |
| 10:10 AM | | Springback Simulation and Tool Surface Compensation Algorithm For Sheet Metal | Ergonomics Designs of Aluminum Beverage Cans and Bottles | |
| | | G. Z. Shen, P. Hu, X. K. Zhang, X. B. Chen, and X. D. Li | J. Han, R. Itoh, K. Yamazaki, S. Nishiyama, and T. Shinguryo | |
| 10:35 AM | Integrated Stamping Simulation Using State of the Art Techniques | Compensating Springback in the Automotive Practice using MASHAL | Use of the Inverse Approach for the Manufacture and Decoration of Food Cans | |
| | D. Ling, M. Lambriks, and F. El Khaldi | S. Ohnimus, M. Petzoldt, B. Rietman, and J. Weiher | G. A. Duffett, A. Forgas, L. Neamtu, H. Naceur, J.L. Batoz, and Y.Q. Guo | |
| 11:00 AM | Controlled FEM Simulation Ways of Blank Holding Force in Sheet Metal Forming Process | Springback Reduction in Stamping of Front Side Member with a Response Surface Method | Convolute Cut-Edge Design for an Earless Cup in Cup Drawing | |
| | L. Chen, J. C. Yang, and L. W. Zhang | J. H. Song, H. Huh, S. H. Kim, and S. H. Park | R. E. Dick, J. W. Yoon, and F. Barlat | |
| 11:25 AM | CAE Based Die Face Engineering Development to Contribute to the Revitalization of the Tool & Die Industry | Iterative Springback compensation of Numisheet Benchmark #1 | | |
| | A. Tang, W.C. Lee, S. St. Pierre, J. He, K. S. Liu, and C.C. Chen | R. A. Lingbeek, J. Huétink, S. Ohnimus, and J. Weiher | | |
| 11:50 AM | A Benchmark Study for Different Numerical Parameters and Their Impact on the Calculated Strain Levels for a Model Part Door Outer | Effect of Yield Functions on Strain and Springback for Aluminum Panels | | |
| | E. Berger, T. Brenne, A. Heath, B. Hochholdinger, K. Kassem-Manthey, L. Keßler, N. Koch, G. Kortmann, A. Kröff, T. Otto, G. Steinbeck, E.Til, H. Verhoeven, T. C. Vu, and K. Wiegand | K. N. Shah, E. Chu, F. Barlat, L. Zhang | | |
| 12:15 PM | Lunch | | | |
| | Mackinac Ballroom | | | |
| Monday Afternoon | | | |
| | | | | |
| 1:15 PM | Technology Innovation and Future Research Needs in Net Shape Manufacturing |
| | D. Y. Yang, KAIST, Korea | | | |
| | Columbus Room | | | |
| | Business Impact of Stamping CAE and Simulation Technology Session II | Cyclic Deformation Session | Hydroforming Processes Session I | Superplastic & Warm Forming Technology Session I |
| | A. Tang | L. F. Menezes | M. Worswick | L. Tong |
| | | | | |
| | Columbus | Marquette | Richard | Duluth |
| 2:20 PM | Evolutions of Advanced Stamping CAE-Technology Adventures and Business Impact on Automotive Dies and Stamping | Drawbeads: to be or not to be | Design of hydroforming processes for metallic liners used in high pressure hydrogen storage | Material Behavior Based hybrid process for sheet draw-forging thin walled Magnesium Alloys |
| | C. T. Wang | J. L. Alves, S. Bouvier, M. C. Oliveira, and L. F. Menezes | J. C. Gelin, C. Labergere, S. Thibaud, and N. Boudeau | Z. Q. Sheng, and R. Shivpuri |
| 2:45 PM | | Cyclic Bending and Stationary Drawing Deformation of Metal Sheets: Experiments and Associated Numerical Simulations | Design and Optimization of Sheet Hydroforming Process for Manufacturing Oil Tank | Stamping of Thin-Walled Structural Components with Magnesium Alloy AZ31 Sheets |
| | | L. P. Moreira, E. C. Romão, G. Ferron, L. C. A. Vieira, and A. P. Sampaio | C. Prakash and K. Narasimhan | F. K. Chen and C. K. Chang |
| 3:10 PM | Evaluation and Visualization of Surface Defects- a Numerical and Experimental Study on Automotive Sheet Parts | Non-uniform Pressure Distribution in Draw-Bend Friction Test and its Influence on Friction Measurement | Hydroforming of Patchwork Blanks - Numerical Modeling and Experimental Validation | Analytical Formability Model for Elevated Temperature Sheet Metal Forming Processes |
| | A. Anderson | Y. S. Kim, M. K. Jain, and D. R. Metzger | K. Lamprecht, M. Merklein, and M. Geiger | S. Jiang and L. M. Smith |
| 3:35 PM | Afternoon Coffee Break | | | |
| | Rear of Columbus Room | | | |
| | Business Impact of Stamping CAE and Simulation Technology Session II (continued) | Springback Compensation Session II | Hydroforming Processes Session I (continued) | Superplastic & Warm Forming Technology Session II |
| | A. Tang | S. Xu & K. Roll | M. Worswick | J. Carsley |
| | | | | |
| | Columbus |
